Understand Linux Load Averages and Monitor Performance of Linux

In this article, we will explain one of the critical Linux system administration tasks – performance monitoring in regards to system/CPU load and load averages. Before we move any further, let’s understand these two...

Spread the love

In this article, we will explain one of the critical Linux system administration tasks – performance monitoring in regards to system/CPU load and load averages.

Before we move any further, let’s understand these two important phrases in all Unix-like systems:

  • System load/CPU Load – is a measurement of CPU over or under-utilization in a Linux system; the number of processes which are being executed by the CPU or in waiting state.
  • Load average – is the average system load calculated over a given period of time of 1, 5 and 15 minutes.

In Linux, the load-average is technically believed to be a running average of processes in it’s (kernel) execution queue tagged as running or uninterruptible.

Note that:

  • All if not most systems powered by Linux or other Unix-like systems will possibly show the load average values somewhere for a user.
  • A downright idle Linux system may have a load average of zero, excluding the idle process.
  • Nearly all Unix-like systems count only processes in the running or waiting states. But this is not the case with Linux, it includes processes in uninterruptible sleep states; those waiting for other system resources like disk I/O etc.

How to Monitor Linux System Load Average


There are numerous ways of monitoring system load average including uptime which shows how long the system has been running, number of users together with load averages:

$ uptime
07:13:53 up 8 days, 19 min, 1 user, load average: 1.98, 2.15, 2.21

The numbers are read from left to right, and the output above means that:

  • load average over the last 1 minute is 1.98
  • load average over the last 5 minutes is 2.15
  • load average over the last 15 minutes is 2.21

High load averages imply that a system is overloaded; many processes are waiting for CPU time.

We will uncover this in the next section in relation to number of CPU cores. Additionally, we can as well use other well known tools such as top and glances which display a real-time state of a running Linux system, plus many other tools:

Top Command

$ top

Display Running Linux Processes

top - 12:51:42 up 2:11, 1 user, load average: 1.22, 1.12, 1.26
Tasks: 243 total, 1 running, 242 sleeping, 0 stopped, 0 zombie
%Cpu(s): 17.4 us, 2.9 sy, 0.3 ni, 74.8 id, 4.6 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem : 8069036 total, 388060 free, 4381184 used, 3299792 buff/cache
KiB Swap: 3906556 total, 3901876 free, 4680 used. 2807464 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6265 tecmint 20 0 1244348 170680 83616 S 13.3 2.1 6:47.72 Headset 2301 tecmint 9 -11 640332 13344 9932 S 6.7 0.2 2:18.96 pulseaudio 2459 tecmint 20 0 1707692 315628 62992 S 6.7 3.9 6:55.45 cinnamon 2957 tecmint 20 0 2644644 1.035g 137968 S 6.7 13.5 50:11.13 firefox 3208 tecmint 20 0 507060 52136 33152 S 6.7 0.6 0:04.34 gnome-terminal- 3272 tecmint 20 0 1521380 391324 178348 S 6.7 4.8 6:21.01 chrome 6220 tecmint 20 0 1595392 106964 76836 S 6.7 1.3 3:31.94 Headset 1 root 20 0 120056 6204 3964 S 0.0 0.1 0:01.83 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.10 ksoftirqd/0 5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H ....

Glances Tool

$ glances

Glances – Linux System Monitoring Tool

TecMint (LinuxMint 18 64bit / Linux 4.4.0-21-generic) Uptime: 2:16:06
CPU 16.4% nice: 0.1% LOAD 4-core MEM 60.5% active: 4.90G SWAP 0.1%
user: 10.2% irq: 0.0% 1 min: 1.20 total: 7.70G inactive: 2.07G total: 3.73G
system: 3.4% iowait: 2.7% 5 min: 1.16 used: 4.66G buffers: 242M used: 4.57M
idle: 83.6% steal: 0.0% 15 min: 1.24 free: 3.04G cached: 2.58G free: 3.72G
NETWORK Rx/s Tx/s TASKS 253 (883 thr), 1 run, 252 slp, 0 oth sorted automatically by cpu_percent, flat view
enp1s0 525Kb 31Kb
lo 2Kb 2Kb CPU% MEM% VIRT RES PID USER NI S TIME+ IOR/s IOW/s Command wlp2s0 0b 0b 14.6 13.3 2.53G 1.03G 2957 tecmint 0 S 51:49.10 0 40K /usr/lib/firefox/firefox 7.4 2.2 1.16G 176M 6265 tecmint 0 S 7:08.18 0 0 /usr/lib/Headset/Headset --type=renderer --no-sandbox --primordial-pipe-token=879B36514C6BEDB183D3E4142774D1DF --lan
DISK I/O R/s W/s 4.9 3.9 1.63G 310M 2459 tecmint 0 R 7:12.18 0 0 cinnamon --replace
ram0 0 0 4.2 0.2 625M 13.0M 2301 tecmint -11 S 2:29.72 0 0 /usr/bin/pulseaudio --start --log-target=syslog
ram1 0 0 4.2 1.3 1.52G 105M 6220 tecmint 0 S 3:42.64 0 0 /usr/lib/Headset/Headset ram10 0 0 2.9 0.8 409M 66.7M 6240 tecmint 0 S 2:40.44 0 0 /usr/lib/Headset/Headset --type=gpu-process --no-sandbox --supports-dual-gpus=false --gpu-driver-bug-workarounds=7,2
ram11 0 0 2.9 1.8 531M 142M 1690 root 0 S 6:03.79 0 0 /usr/lib/xorg/Xorg :0 -audit 0 -auth /var/lib/mdm/:0.Xauth -nolisten tcp vt8
ram12 0 0 2.6 0.3 79.3M 23.8M 9651 tecmint 0 R 0:00.71 0 0 /usr/bin/python3 /usr/bin/glances
ram13 0 0 1.6 4.8 1.45G 382M 3272 tecmint 0 S 6:25.30 0 4K /opt/google/chrome/chrome ...

The load averages shown by these tools is read /proc/loadavg file, which you can view using the cat command as below:

$ cat /proc/loadavg
2.48 1.69 1.42 5/889 10570

To monitor load averages in graph format, check out: ttyload – Shows a Color-coded Graph of Linux Load Average in Terminal

On desktop machines, there are graphical user interface tools that we can use to view system load averages.

Understanding System Average Load in Relation Number of CPUs

We can’t possibly explain system load or system performance without shedding light on the impact of the number of CPU cores on performance.

Multi-processor Vs Multi-core

  • Multi-processor – is where two or more physical CPU’s are integrated into a single computer system.
  • Multi-core processor – is a single physical CPU which has at least two or more separate cores (or what we can also refer to as processing units) that work in parallel. Meaning a dual-core has 2 two processing units, a quad-core has 4 processing units and so on.

Furthermore, there is also a processor technology which was first introduced by Intel to improve parallel computing, referred to as hyper threading.

Under hyper threading, a single physical CPU core appears as two logical CPUs core to an operating system (but in reality, there is one physical hardware component).

Note that a single CPU core can only carry out one task at a time, thus technologies such as multiple CPUs/processors, multi-core CPUs and hyper-threading were brought to life.

With more than one CPU, several programs can be executed simultaneously. Present-day Intel CPUs use a combination of both multiple cores and hyper-threading technology.

To find the number of processing units available on a system, we may use the nproc or lscpu commands as follows:

$ nproc
4
OR
lscpu

Another way to find the number of processing units using grep command as shown.

$ grep 'model name' /proc/cpuinfo | wc -l
4

Now, to further understand system load, we will take a few assumptions. Let’s say we have load averages below:

23:16:49 up 10:49, 5 user, load average: 1.00, 0.40, 3.35
On a single core system this would mean:
  • The CPU was fully (100%) utilized on average; 1 processes was running on the CPU (1.00) over the last 1 minute.
  • The CPU was idle by 60% on average; no processes were waiting for CPU time (0.40) over the last 5 minutes.
  • The CPU was overloaded by 235% on average; 2.35 processes were waiting for CPU time (3.35) over the last 15 minutes.
On a dual-core system this would mean:
  • The one CPU was 100% idle on average, one CPU was being used; no processes were waiting for CPU time(1.00) over the last 1 minute.
  • The CPUs were idle by 160% on average; no processes were waiting for CPU time. (0.40) over the last 5 minutes.
  • The CPUs were overloaded by 135% on average; 1.35 processes were waiting for CPU time. (3.35) over the last 15 minutes.

You might also like:

  1. 20 Command Line Tools to Monitor Linux Performance – Part 1
  2. 13 Linux Performance Monitoring Tools – Part 2
  3. Perf- A Performance Monitoring and Analysis Tool for Linux
  4. Nmon: Analyze and Monitor Linux System Performance

In conclusion, if you are a system administrator then high load averages are real to worry about. When they are high, above the number of CPU cores, it signifies high demand for the CPUs, and low load averages below the number of CPU cores tells us that CPUs are underutilized.

Facebook Comments
Spread the love

Posted by News Monkey